Coral Stone Crete
Decorative cement-based texture coating.
A premium, cement-based, decorative wall texture coating designed to create stunning, scratch-finish effects on interior and exterior surfaces. Formulated from high-quality white or grey cement, graded aggregates, and specialized polymers, our Stone Crete provides exceptional adhesion, weather resistance, and workability. It allows applicators to achieve a range of artistic patterns — from fine scratches to deep, bold grooves — giving walls a distinctive, three-dimensional character that combines aesthetics with long-lasting protection.
Decorative durability, built in.
Engineered to spec — every batch lab-checked.
Where Coral Stone Crete is used.
Step-by-step application guide.
Follow these 4 steps to achieve professional results. Timing and technique notes are included for each stage.
Surface Preparation
The substrate must be sound, clean, fully cured, and free from dust, oil, form-release agents, and any loose particles. All plastering must be completed and cured for a minimum of 28 days.
Mixing
Pour 20 – 25 ml of clean potable water per 1 kg of powder into a clean mixing bucket. Gradually add the Stone Crete powder while mixing with a low-speed mechanical stirrer (300–450 RPM). Mix continuously for 5 minutes until a homogeneous, smooth, slump-free paste is achieved. Let stand 5–10 minutes for additives to dissolve, then remix for 2 minutes. Dampen the surface with clean water (drain off excess). Do not add more water than recommended.
Application
Using a stainless-steel trowel, apply the mixed texture coat evenly to a thickness corresponding to the largest aggregate grain size (usually 2.5 mm). Ensure complete coverage without leaving the substrate visible. Work in manageable vertical sections — complete an entire section without breaks to avoid cold joints.
Creating the Texture
Wait for the applied material to set slightly — when the surface loses its initial wet sheen but is still workable (typically 10–30 minutes). Using a clean plastic or wooden scratch float, drag the float in a steady motion. Patterns: Horizontal Scratch (level strokes), Vertical Scratch (upward or downward), Circular/Swirl (rotating motions), or Random/Rustic (irregular, overlapping). Clean the float frequently with water to prevent material build-up.
Handling and care notes.
Keep dry. Keep tied.
- Keep away from water and damp area.
- Avoid using partially used material; open bags with partially used material should be kept in a bag with its mouth tied tightly with string to prevent lump formation.
- As temperature, humidity, water addition and other parameters vary from site to site; the above information should be treated as general guidelines.
Eco-friendly, but cement-based.
Contains only eco-friendly fillers and additives. However, being cement based, it is alkaline and hence it is advisable to avoid direct eye and skin contact. In case of eye contact, kindly wash with clean water for at least 15 minutes and seek medical help. Keep out of children's reach.
Other products in this category.
Coral Wall Putty
Polymer-modified, cement-based wall putty.
View ProductCoral Stone Plast
Single-coat, no-sanding finishing plaster.
View ProductEngineered to your spec.
Talk to us about a custom decorative finishes grade — particle size, packaging, quantity.
Have a spec sheet? Send it our way.
Tell us your particle size, packaging, and quantity — we'll come back with a quote.