Coral Wall Putty
Polymer-modified, cement-based wall putty.
A high-performance, polymer-modified, cement-based wall putty engineered to provide a smooth, durable, and water-resistant base for interior and exterior paint applications. Formulated from premium cement, graded fillers, and advanced additives, our putty delivers superior adhesion, exceptional crack resistance, and a consistent matte finish — making it the economical and reliable choice for high-quality construction projects.
Built for performance, easy to apply.
Engineered to spec — every batch lab-checked.
Where Coral Wall Putty is used.
Step-by-step application guide.
Follow these 6 steps to achieve professional results. Timing and technique notes are included for each stage.
Surface Preparation
Ensure the surface is clean, dry, and free from any loose particles, dust, oil, or grease.
Priming
For best results, especially on highly porous surfaces, apply a coat of Coral primer and allow it to dry completely.
Mixing
Take the required quantity in a clean container. Gradually add approximately 35–40% clean water by weight and mix thoroughly with a mechanical stirrer to form a smooth, lump-free, creamy paste. Allow the mixed paste to stand for 5–10 minutes and remix briefly before application.
Application
Using a putty knife or trowel, apply the first coat evenly to a thickness of approximately 1–1.5 mm. Allow it to dry for 4–6 hours.
Second Coat
Apply the second finishing coat to achieve a perfectly smooth and level surface. Total combined thickness should not exceed 2–3 mm. Check finishing of wall after 24 hours. Do not add more water than recommended.
Sanding
After the putty is fully dry (minimum 24 hours post final coat), gently sand the surface with fine-grit sandpaper (180–220 grit) to remove any minor trowel marks and achieve a super-smooth finish.
Handling and care notes.
Keep dry. Keep tied.
- Keep away from water and damp area.
- Avoid using partially used material; open bags with partially used material should be kept in a bag with its mouth tied tightly with string to prevent lump formation.
- As temperature, humidity, water addition and other parameters vary from site to site; the above information should be treated as general guidelines.
Eco-friendly, but cement-based.
Contains only eco-friendly fillers and additives. However, being cement based, it is alkaline and hence it is advisable to avoid direct eye and skin contact. In case of eye contact, kindly wash with clean water for at least 15 minutes and seek medical help. Keep out of children's reach.
Other products in this category.
Coral Stone Crete
Decorative cement-based texture coating.
View ProductCoral Stone Plast
Single-coat, no-sanding finishing plaster.
View ProductEngineered to your spec.
Talk to us about a custom decorative finishes grade — particle size, packaging, quantity.
Have a spec sheet? Send it our way.
Tell us your particle size, packaging, and quantity — we'll come back with a quote.